DC Worm Gear Motor NFP-5840-31ZYS-D Used In LSMounts To Scan Target Fish

DC Worm Gear Motor NFP-5840-31ZYS-D Used In LSMounts To Scan Target Fish


Worm Electric Motor NFP-5840-31ZYS-D Used In LSMounts Fishing Device

LSMount increase the ability to find fish, structure, and stay on target even when your trolling motor turns. With LSMmounts you can scan for targets regardless of the direction of your trolling motor.

No other electronics has ever done before BUT mounted on a trolling motor they will not stay on target when your trolling motor turns. LSMount end the frustration of losing that perfect fishing spot when your trolling motor turns. Between the wind, boat drift precise positioning.

Strong 12 volt 6 rpm motor NFP-5840-31ZYS-D is installed in ISMounts, deploying with the trolling motor, provides immediate feedback and guide when fish are present, making it easy to catch, LSMounts have been installed on Bass Boats, Crappie Boats, Deep V, and Pontoons. These units are simple to install…generally no special holes to drill…no space needed for boxes and etc.


Self-Locking DC Geared Motor Model NFP-5840-31ZYS-D

Motor Model NFP-5840-31YS-D
Rated Voltage 12V/ 24V DC
Rated Current 0.08A – 0.3A
No-load Speed 5rpm – 470rpm
Efficiency 9.6W – 28.8W
Maximum Torque 70kg.cm
Rotation CW/ CCW
Shaft Dimension Dia – 8mm x Length – 15mm
Weight 360g
Details Click 


Customers Also Check The Following Worm Motors

Multipurpose Coin DC Vibration Motor NFP-C0820 Used In Muse S: Brain Sensing Headband

Multipurpose Coin DC Vibration Motor NFP-C0820 Used In Muse S: Brain Sensing Headband

coin-vibration-motor-Muse-S-Brain-Sensing-Headband- Google

Coin Vibration Motor NFP-C0820 Used In Muse Headbands

Say good-bye to distractions & racing thoughts with real-time biofeedback. Muse Sensing headband is a multi-sensor meditation device that provides real-time feedback on your brain activity, heart rate, breathing, and body movements to help you build a consistent meditation practice.

Busy days mean busy minds at night & restless sleep. Imagine an intuitive sleep guide, helps you shut off your busy mind & guides you into a restful sleep. A Muse S is a responsive new kind of sleep experience that is designed to put you to sleep and help you fall back asleep if you’ve woken up during the night. Unlock over 500 meditations on stress, focus & more.

The eccentirc rotating mass coin vibration motor Model NFP-C0820 will be positioned in a Muse S: Brain Sensing Headband – Technology Enhanced Meditation, it’s a slightly vibration meditation & sleep support equipment, helps you understand & track how well you focus, sleep and recharge so you can refocus during the day and recover each night. Immersive & intelligent sleep soundscapes, get your best rest through overnight sleep tracking, deep sleep insights, position tracking and a personalized sleep score.


∅8mm ERM Coin Type Vibration Motor NFP-C0820

Motor Model NFP-C0820
Motor Diameter 8mm
Motor Thickness 2mm
Rated voltage 3V DC
Rated Speed 13000 ± 2500rpm min
Rated Current 80mA Max
Rotation CM or CCW
Starting Voltage 2.3V DC Max
Vibration Force 0.55G
More Detail Click 


Customers Also Check The Following Small Vibration Motor

Tiny Coin Vibration Motor Model NFP-C0720 Used In Infrafon CC1 Smart Badge

Tiny Coin Vibration Motor Model NFP-C0720 Used In Infrafon CC1 Smart Badge


Tiny Motor NFP-C0720 Used In Integrated Smart Badge

The Infrafon CC1 device is largely comparable to a smartphone in terms of features, as light as 15g, it has a touch e-paper display in which the flat motor NFP-C0720 is embedded to function, for personal photo identification Display of credentials and upcoming tasks. Doors or medicine cabinets can be intelligently recorded and operated via NFC (DESFire, etc.) or BLE. The device also acts as a smart pager for transmitting emergency calls and warnings.



Infrafon CC1 In Following Main Respects

The Infrafon CC1 Smart Badge protects and optimizes the human journey for patients, visitors, workers and more, bringing organizations into the digital future.
For healthcare workers, the Infrafon smart badge system will benefit from mobile smart messaging, alerts, proper logging and more
For managing employees, Infrafon improves team collaboration with secure messaging, precise RTLS and connecting to IoT sensors via MQTT
For self-service terminal, identification ID authentication ensures automatic device assignment, data storage, and personalization data is secure.




Long Wear Life 3V Pancake Vibration Motor Parameters

Motor Model NFP-C0720
Motor diameter 7.0mm ± 0.1mm
Motor thickness 2.0mm ± 0.1mm
Rated voltage 3.0V DC
Voltage range 2.7V – 3.3V
Rated vibration speed 10,000rpm min
Rated current 85mA max
Start voltage 2.3V DC max
Rotation CW, CCW
Wire length 50mm
Operating environment -20~60°C
Storage environment -30~70°C
Details Click 


People Also View These Small Vibration Motors


6mm Micro Planetary Gear Motor NFP-609-699-0675 Used In BAUER Model Car

6mm Micro Planetary Gear Motor NFP-609-699-0675 Used In BAUER Model Car



Plastic Planetary Gearbox Used In Model Car

BAUER uses the old original model from 1995 to realize the innovation of the model car. This model differs from the previous coupe version in that the front bumper guard has been removed. Here are some car models. Equipped with an electric drive from the manufacturer “AutoWorld”. This drive has been optimized for use in this model. Adopt the smallest 6mm micro gear motor model NFP-609-699-0675 and put it into it, the performance is more stable and the life is longer.



⭐️Porsche 911 coupe burgundy
⭐️Porsche 911 coupe moss green
⭐️Opel Steinmetz Commodore ge/sw 24h Spa 1970
⭐️Opel Rekord C Black Widow #201
⭐️Mercedes Benz W110 dark blue roof cream
⭐️Mercedes Benz 200 red with electric flashing light, ect.


3V DC Gear Motor Model NFP609-699-0675 Datasheet

Motor Model NFP-609-699-0675
L1 (Motor Body + Gearbox) 20.5mm
L2 (Motor Body) 9.3mm
Wire Length 50mm
Shaft Diameter Φ2.0mm; D-section=1.5mm
Shaft Length 2.7mm
Total Weight 1.9g
Motor Voltage Range 2.5-5.0V
Motor Rated Voltage 3.0V
Motor Speed (Approx) 33,000 rpm
Gearbox Number Of Layers 4
Gearbox Gear Ratio 1:699.5
No-Load Voltage 3.0V
No-Load Speed 47 rpm
No-Load Current (Approx) 60mA
Output Max Torque (Approx) 220g.cm
Details Click 


Customers Also View Following 6mm Gear Motors


Encapsulated Vibration Motor Model NFP-E1015 Used In Joystick

Encapsulated Vibration Motor Model NFP-E1015 Used In Joystick



Eccentric Rotating Mass Vibration Motor Used In Joystick

• Hall effect, resistive and switch joysticks
• High-precision single, double and triple-axis models
• Industrial thumb joysticks with button, protection class up to IP67
• Analog and digital output
• For industrial applications, cabin cars and security, household items. (Truck & Aircraft & Gamepad & Wheelchairs & Surveillance Cameras & Lawn Mower)

waterproof-vibraton-motor-use-in joystick

The powerful vibration motor model NFP-E1015 is positioned in joystick, which benefit from being waterproof or water-resistant. The function of motor is vibration alerting or haptic feedback, long life, strong vibration, high efficiency, more practical and durable. The encapsulated vibration motor can achieve waterproof and non-corroding even in wet conditions, rain or daily light mist.





Tiny Motor NFP-E1015

Joysticks are popular for gaming, driving vehicles, and controlling heavy machinery which is perfect for a vertically positioned cylindrical ERM vibration motor.


7G Rainproof Vibrating Motor Model NFP-E1015

The user touches or holds the joystick and applies force to it. The direction of the vibration feedback should be in the same plane as the force, so that the vibration force is directed towards the user’s grip. This will ensure that the full effect of the haptic feedback is felt.

Motor Model NFP-E1015
Wire Length 100mm or 110mm with Molex 1.25P
Rated Voltage 3.7 V DC
Rated Current 450mA max
Rated Speed 9,500±2,000 rpm
Shaft End Play 0.05-0.30mm
Unmarked Tolerance ±0.1mm
More detial Click


Customer Also Check Waterproof Vibration Motor As follow

Pancake Vibration Motor NFP-C1030 Used In WHOOP 4.0 Wearable Device Smart Strip

Pancake Vibration Motor NFP-C1030 Used In WHOOP 4.0 Wearable Device Smart Strip



Coin Vibration Motor Used In WHOOP

Want to know to get feedback on how much sleep your body needs? WHOOP monitors your sleep, recovery, and daily effort around the clock to deliver actionable insights on how you can optimize your performance. Measure how active you are and get daily targets for how active to be based on your body’s recovery, including skin temperature, blood oxygen and heart rate metrics. Track your daily behaviors like diet type, stress levels, caffeine intake, and more. Know when you’re within normal range and get alerts when you deviate.


The micro vibration motor NFP-C1030 will be positioned in a WHOOP. 3v vibration motor also called pancake vibration motor, compact and convenient to use, no external moving part. Used in instruments haptic. Suitable for light weight wearable devices. It was designed for devices requiring vibration alerts or haptic feedback.

Smallest 3V Vibration Motor Model Datasheet

Motor Model NFP-C1030
Motor Diameter 10.0mm ± 0.1mm
Motor Thickness 3.0mm ± 0.1mm
Rated Voltage 3.0V DC
Voltage Range 2.3~3.6V DC
Rated Speed 11,000 ± 2,500rpm
Rated Current 80mA max
Nominal Amplitude Vibe Force 1.40G
More Detail Click 


Customers Also Check The Following Coin Motors