37mm 12V 24V DC Gear Motor M6 Lead Screw Shaft NFP-JGB37-3530-M6

High Torque Low Speed Brushed Gear Motor Data Sheet

M6 Threaded Screw Speed Reduction Gear Motor

First, this gear motor uses full metal gears, a pure copper coil, carbon brushes, and a strong magnetic strip. Therefore, it can give steady speed and strong torque.

Also, the motor runs at about 53dB when tested indoors from 30cm away. As a result, it is a good choice for systems that need strong torque with lower noise.

Main Features

• M6 threaded shaft: First, the 52mm long shaft works well for screw drive and linear motion use.
• High torque: Also, the motor can provide up to 35kg.cm torque.
• Wide speed range: In addition, output speed ranges from 7rpm to 1,600rpm.
• Two voltage options: Therefore, you can choose either 12V or 24V DC.
• Metal gearbox: Also, the metal gears help support long-term use.
• Reversible rotation: Finally, both CW and CCW rotation are supported.

General Specifications

Next, check the main data below. Then, choose the voltage, speed, and ratio that best fit your system.

12V 6,000rpm Gear Motor Data

First, this version uses a 12V DC motor with a 6,000rpm motor speed before gear reduction. Therefore, low ratios give more speed, while high ratios give more torque.

Next, compare the speed and torque values below. Then, choose the ratio that fits your load.

Model: NFP-JGB37-3530-M6-1260, 12V DC, Motor Without Gearbox 6,000rpm

Note: All reduced no-load speeds have a tolerance of ±15%.

For example, choose a low ratio when speed is more important. However, choose a high ratio when more torque is needed.

24V 6,000rpm Gear Motor Data

Next, this version uses 24V DC. Also, it keeps the same wide range of gear ratios.

In addition, the listed current is lower than the 12V version. Therefore, it can fit many 24V control systems.

Model: NFP-JGB37-3530-M6-2460, 24V DC, Motor Without Gearbox 6,000rpm

Note: All reduced no-load speeds have a tolerance of ±15%.

As a result, this version is useful when your system already uses a 24V power source.

12V 10,000rpm Gear Motor Data

Also, the 12V 10,000rpm version gives more output speed. Therefore, it is a good choice when faster motion is needed.

However, high ratios can still give low speed and strong torque. So, the same motor can fit many different drive needs.

Model: NFP-JGB37-3530-M6-12100, 12V DC, Motor Without Gearbox 10,000rpm

Note: All reduced no-load speeds have a tolerance of ±15%.

For example, a 6.25:1 ratio gives high speed. In contrast, an 810:1 ratio gives very low speed and high torque.

24V 10,000rpm Gear Motor Data

Finally, the 24V 10,000rpm version gives both high input speed and a wide gear ratio range. Also, its listed current is lower than the 12V 10,000rpm version.

Therefore, this model can be used for both fast motion and slow high-torque motion.

Model: NFP-JGB37-3530-M6-24100, 24V DC, Motor Without Gearbox 10,000rpm

Note: All reduced no-load speeds have a tolerance of ±15%.

How to Choose the Right Gear Ratio

First, check the output speed you need. Next, check the torque needed by the load.

Then, compare both values with the tables above. In general, a low ratio gives more speed. However, a high ratio gives more torque.

1. First, choose 12V or 24V to match your power supply.
2. Next, choose 6,000rpm or 10,000rpm.
3. Then, check the no-load and rated speed.
4. Also, make sure the rated torque is enough for your load.
5. Finally, leave some extra torque for start-up and load changes.

Important Notes

• First, use the motor only with the correct voltage.
• Also, do not keep the shaft locked while power is on.
• In addition, avoid long running time near stall.
• Therefore, check motor heat during real use.
• Finally, test a sample before a large order.

24V 12V Gear Motor Permanent Magnet Motor Dimension

First, this motor supports both forward and reverse rotation. Also, it has a small body and strong torque.

In addition, the metal gearbox helps keep the output smooth and stable. Therefore, the motor can be used in many small drive systems.

Different output shafts are also available. So, if you need another shaft type or custom setup, please contact us.

Typical Uses

• First, robotics
• Also, smart home systems
• In addition, electric actuators
• Next, door and window drives
• Also, factory machines
• Finally, custom motion systems

Keywords:
12v 1000rpm gear motor, high torque electric gear motor, speed reduction geared motor