Stepper Motor Controller Compatible with 2 Phases 4-Wire or 5-Wire Stepping Motor Model NFP-PWM-ST2445

2-phase Stepper Gear Reduction Motor Driver Data Sheet

This versatile controller is engineered for precise motion control in robotics, automation, and other applications requiring accurate positioning.

The stepper motor controller supports both 2-phase 4-wire and 5-wire stepper motors, offering flexibility in design and functionality, ensuring efficient operation with reduced power consumption and minimal heat generation, enhancing reliability and longevity.

Stepper Motor Controller Board Introduction

The controller features a compact size and is designed for easy wiring and installing in confined spaces.

Stepping Motor Controller has 4 Operating Mode

Normal Mode 1] S1 is the start/stop button, S2 is the forward/reverse button, and W2 adjusts the speed with a potentiometer. If limit reversing is needed, two limit switches can be connected externally to P3. Attach contact to the motor shaft so that the motor will reciprocate between the two limit switches.
Normal Mode 2  Start button for forward rotation, S2 is the start button for reverse rotation, and any key stops the motor. Speed is adjusted with W2. If limit stopping is required, two limit switches can be connected externally to P3. When the motor reaches a limit switch, it stops, and pressing the opposite direction button will make the motor reverse.
Jogging Mode  Press S1 for forward jog, release to stop; press S2 for reverse jog, release to stop. Speed is adjusted with W2. If limit stopping is required, connect limit switches to P3.
Automatic Reciprocating Mode  S1 is the start/stop button, S2 is for forward/reverse, W2 adjusts the speed with a potentiometer, and W adjusts the automatic reciprocating steps. After starting, the motor will automatically reciprocate within the steps set by W1.

Miniature Stepper Motor Driver Board Speed Controller

W1 automatic reciprocating travel adjustment potentiometer: Counter-clockwise adjusts for shorter travel; clockwise adjusts for longer travel.

P1 automatic reciprocating travel adjustment expansion pin: In the short travel position, W1 adjusts from 1 to 200 steps. In the long travel position, W1 adjusts from 200 to 1200 steps.

W2 motor speed adjustment potentiometer. Turn counterclockwise to decrease speed, clockwise to increase speed.

P2 speed adjustment extension pin. In the slow speed mode, W2 adjustment range is: slowest, requiring 3.125 seconds per step — fastest, requiring 0.0625 seconds per step (16 steps per second). In the fast speed mode, W2 adjustment range is: slowest, requiring 0.0625 seconds per step (16 steps per second) — fastest, requiring 0.00125 seconds per step (800 steps per second).

P3 pin function description: external travel switch, can also be high and low level signals of various sensors, low level is valid.

P5 stepper motor output pins, connect wires according to your selection of either a 2-phase 4-wire or 4-phase 5-wire stepper motor, following the characters on the board correctly.

P6 power input pins, can be connected to a DC 5V-12V power supply externally.

Keywords:

drive control board, micro stepper driver, dc motor Speed controller, small motor speed regulator, tiny stepper motor governor switch