37mm 12V 24V Permanent Magnet DC Gear Motor NFP-JGB37-3535

Micro Speed Reduction Gear Motor Data Sheet

First, the NFP-JGB37-3535 is a compact 37mm DC gear motor made for low-speed and high-torque use. Also, it uses metal gears, pure copper windings, and carbon brushes for steady operation.

In addition, the motor offers both 12V and 24V DC versions. Therefore, it can fit many small drive systems, smart devices, robots, and other motion projects.

Main Features

• Long Service Life: First, high-quality carbon brushes help support long working life.
• Low-Speed Control: Also, the wide gear ratio range makes slow and steady motion easy to select.
• All-Metal Gears: In addition, the metal gearbox gives good strength and wear resistance.
• High Torque: Therefore, the motor can provide up to 35kg.cm rated torque.
• Reversible Rotation: Finally, both CW and CCW rotation are supported.

General Specifications

Next, review the main motor data below. Then, compare the voltage, speed, and torque with your system needs.

12V 6,000rpm Gear Motor Data

First, this version uses a 12V DC motor with a 6,000rpm motor speed before gear reduction. Therefore, a low ratio gives higher output speed, while a high ratio gives more torque.

Next, check the table below. Then, choose the ratio that best fits your speed and load needs.

Model: NFP-JGB37-3535-1260, 12V DC, Motor Without Gearbox 6,000rpm

Note: All reduced no-load speeds have a tolerance of ±15%.

For example, use a low ratio when you need more speed. However, use a high ratio when you need more torque.

24V 6,000rpm Gear Motor Data

Next, the 24V 6,000rpm version offers the same broad gear ratio range. Also, it uses less current than the 12V version.

Therefore, this option can work well in systems that already use a 24V DC power source.

Model: NFP-JGB37-3535-2460, 24V DC, Motor Without Gearbox 6,000rpm

Note: All reduced no-load speeds have a tolerance of ±15%.

As a result, you can select this version when low current at 24V is useful for your design.

12V 5,000rpm Gear Motor Data

Also, the 12V 5,000rpm version gives a lower base motor speed. Therefore, its output speed is lower at the same gear ratio.

In addition, it still offers strong torque at high ratios. So, it is a useful choice for slow drive systems.

Model: NFP-JGB37-3535-1250, 12V DC, Motor Without Gearbox 5,000rpm

Note: All reduced no-load speeds have a tolerance of ±15%.

For example, this version can be useful when slow speed matters more than top output speed.

24V 5,000rpm Gear Motor Data

Finally, the 24V 5,000rpm version combines lower motor speed with lower current. Therefore, it is well suited to many 24V low-speed drive systems.

Also, the high gear ratios give strong torque. However, the motor must not be kept in a locked state.

Model: NFP-JGB37-3535-2450, 24V DC, Motor Without Gearbox 5,000rpm

Note: All reduced no-load speeds have a tolerance of ±15%.

How to Choose a Gear Ratio

First, check the speed your product needs. Next, check the load and torque needed at the output shaft.

Then, compare these values with the tables above. In general, lower ratios give more speed. However, higher ratios give more torque.

1. First, select 12V or 24V to match your power supply.
2. Next, choose the 5,000rpm or 6,000rpm motor version.
3. Then, compare the no-load and rated speed.
4. Also, make sure the rated torque is enough for the load.
5. Finally, keep some extra torque for start-up and load changes.

Important Notes

• First, use the correct motor voltage.
• Also, do not keep the shaft locked while power is on.
• In addition, avoid long operation near stall.
• Therefore, check motor heat during real use.
• Finally, test a sample before a large order when possible.

12V 24V Small Electric Gear Motor Diagram

First, the motor supports both forward and reverse rotation. Also, its compact body makes it easy to install in small systems.

In addition, the metal gearbox helps provide smooth motion and steady torque. Therefore, it can be used in robots, smart devices, small machines, and other drive systems.

• Reversible Rotation: First, switch the motor polarity to change the direction.
• Low Noise: Also, the motor is made for smooth and quiet running.
• Carbon Brushes: In addition, quality carbon brushes help give stable motor output.
• Strong Gearbox: Finally, the metal gears help support long-term use.

Keywords:
small gear motor, 12v gear motor, micro dc gear motor, miniature geared electric motors