37mm 6V 12V 24V DC Gear Motor w/Encoder Model NFP-GM37-520-EN
$20.00
Experience efficiency with the 37mm 6V 12V 24V DC Gear Motor w/Encoder. Its high torque and variable speed make it a must-have, buy now!
Product Selection Guide
First, review the product overview and note the features that fit your project.
Next, compare the technical details with the needs of your system.
Quick Review Steps
- Check the listed options before you choose a version.
- Review the drawings and connection notes when they appear.
- Confirm the selected setup before you place an order.
In addition, contact our team if you need help with a custom request.
Product Overview
First, review the product information below. It presents the available details in a practical order.
How to Review the Details
- Start with the product overview and identify the features relevant to your application.
- Next, check the technical information and compare it with your project requirements.
- When available, also review the drawings, connection notes, and selection guidance.
- Finally, confirm your selection before placing an order.
In addition, contact our team if you need help reviewing a custom request.
High Efficiency NFP-Motor Micro Metal Gear Motor with Encoder Data
Direct Current (DC) Hall Effect Encoder Reduced-speed Motor, Carbon Brush Permanent Magnet Motor.
Technical Details
Also, review the table below and compare each listed option.
| Model | NFP-GM37-520-EN |
|---|---|
| Rated Voltage | 6V / 12V / 24V DC |
| No-load Speed | 10rpm – 1,530rpm |
| No-load Current | ≤0.1A / ≤0.16A |
| Power Range | Max 2W / 7W / 12W |
| Max Torque | 25kg.cm |
| Shaft Diameter | 6mm |
| Shaft Length | 21mm |
| Wiring Specification | PH2.0-6PIN / XH2.54-6PIN |
| Rotation | CW / CCW |
| Weight | appr. 155g |
Afterward, use these details to confirm the best choice for your project.
Model: NFP-GM37-520-EN, 6V DC
Option Details
Next, check the table below for the details that fit your project.
| Ratio | Gearbox Length | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque | PPR |
|---|---|---|---|---|---|---|---|---|---|
| 6.3:1 | 19mm | ≤0.1A | 760rpm | ≤0.35A | 570rpm | 0.2kg.cm | ≤1.7A | 0.7kg.cm | 69.3 |
| 10:1 | 19mm | ≤0.1A | 480rpm | ≤0.35A | 360rpm | 0.3kg.cm | ≤1.7A | 1kg.cm | 110 |
| 18.8:1 | 21.5mm | ≤0.1A | 205rpm | ≤0.35A | 192rpm | 0.6kg.cm | ≤1.7A | 1.9kg.cm | 207 |
| 30:1 | 21.5mm | ≤0.1A | 160rpm | ≤0.35A | 120rpm | 1kg.cm | ≤1.7A | 3kg.cm | 330 |
| 50:1 | 24mm | ≤0.1A | 95rpm | ≤0.35A | 72rpm | 3kg.cm | ≤1.7A | 5.5kg.cm | 550 |
| 90:1 | 24mm | ≤0.1A | 53rpm | ≤0.35A | 40rpm | 4.8kg.cm | ≤1.7A | 9kg.cm | 990 |
| 150:1 | 26.5mm | ≤0.1A | 32rpm | ≤0.35A | 24rpm | 8.6kg.cm | ≤1.7A | 16kg.cm | 1,650 |
| 270:1 | 26.5mm | ≤0.1A | 18rpm | ≤0.35A | 13rpm | 14kg.cm | ≤1.7A | 30kg.cm | 2,970 |
| 450:1 | 29mm | ≤0.1A | 10rpm | ≤0.35A | 8rpm | 20kg.cm | ≤1.7A | 35kg.cm | 4,950 |
Therefore, compare these values with your system before you order.
Note: all reduced no-load speeds have a tolerance of ±15%.
Model: NFP-GM37-520-EN, 12V DC
Selection Data
In addition, use the table below to review the available data.
| Ratio | Gearbox Length | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque | PPR |
|---|---|---|---|---|---|---|---|---|---|
| 6.3:1 | 19mm | ≤0.16A | 1,530rpm | ≤1.2A | 850rpm | 0.6kg.cm | ≤3.5A | 1.2kg.cm | 69.3 |
| 10:1 | 19mm | ≤0.16A | 960rpm | ≤1.2A | 540rpm | 1kg.cm | ≤3.5A | 2kg.cm | 110 |
| 18.8:1 | 21.5mm | ≤0.16A | 510rpm | ≤1.2A | 285rpm | 1.8kg.cm | ≤3.5A | 4kg.cm | 207 |
| 30:1 | 21.5mm | ≤0.16A | 320rpm | ≤1.2A | 180rpm | 3kg.cm | ≤3.5A | 6kg.cm | 330 |
| 50:1 | 24mm | ≤0.16A | 192rpm | ≤1.2A | 105rpm | 4.8kg.cm | ≤3.5A | 10kg.cm | 550 |
| 90:1 | 24mm | ≤0.16A | 107rpm | ≤1.2A | 60rpm | 8.5kg.cm | ≤3.5A | 17kg.cm | 990 |
| 150:1 | 26.5mm | ≤0.16A | 64rpm | ≤1.2A | 36rpm | 14.5kg.cm | ≤3.5A | 25kg.cm | 1,650 |
| 270:1 | 29mm | ≤0.16A | 35rpm | ≤1.2A | 20rpm | 20kg.cm | ≤3.5A | 35kg.cm | 2,970 |
| 450:1 | 29mm | ≤0.16A | 21rpm | ≤1.2A | 14rpm | 25kg.cm | ≤3.5A | 35kg.cm | 4,950 |
As a result, you can narrow the options before making a choice.
Note: all reduced no-load speeds have a tolerance of ±15%.
Model: NFP-GM37-520-EN, 24V DC
Additional Product Data
Meanwhile, compare the table entries with the needs of your system.
| Ratio | Gearbox Length | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque | PPR |
|---|---|---|---|---|---|---|---|---|---|
| 6.3:1 | 19mm | ≤0.1A | 1,530rpm | ≤0.95A | 850rpm | 0.6kg.cm | ≤2.5A | 1.2kg.cm | 69.3 |
| 10:1 | 19mm | ≤0.1A | 960rpm | ≤0.95A | 540rpm | 1kg.cm | ≤2.5A | 2kg.cm | 110 |
| 18.8:1 | 21.5mm | ≤0.1A | 510rpm | ≤0.95A | 285rpm | 1.8kg.cm | ≤2.5A | 4kg.cm | 207 |
| 30:1 | 21.5mm | ≤0.1A | 320rpm | ≤0.95A | 180rpm | 3kg.cm | ≤2.5A | 6kg.cm | 330 |
| 50:1 | 24mm | ≤0.1A | 192rpm | ≤0.95A | 105rpm | 4.8kg.cm | ≤2.5A | 10kg.cm | 550 |
| 90:1 | 24mm | ≤0.1A | 107rpm | ≤0.95A | 60rpm | 8.5kg.cm | ≤2.5A | 17kg.cm | 990 |
| 150:1 | 26.5mm | ≤0.1A | 64rpm | ≤0.95A | 36rpm | 14.5kg.cm | ≤2.5A | 25kg.cm | 1,650 |
| 270:1 | 29mm | ≤0.1A | 35rpm | ≤0.95A | 20rpm | 20kg.cm | ≤2.5A | 35kg.cm | 2,970 |
| 450:1 | 29mm | ≤0.1A | 21rpm | ≤0.95A | 14rpm | 25kg.cm | ≤2.5A | 35kg.cm | 4,950 |
Finally, confirm that the listed data matches the needs of your product.
Note: all reduced no-load speeds have a tolerance of ±15%.
Small Permanent Magnetic Motor with Cover Outline Drawing
Small electric gear motors are widely used in applications such as smart self-balancing scooters, smart line-following robot cars, smart home appliances, robots, camera gimbals, and electric adhesive tape cutters.
High Torque Low Noise DC Gear Motor with Encoder Wiring Connection
Adjust the polarity of the red and white wires to change the basic rotation direction of the motor.
Hall encoder realizes real-time feedback of rotational speed, and the A/B two-phase each outputs a basic signal of 11PPR, which is accurate without losing pulses and can accurately record operating data.
Further Technical Data
Furthermore, read the table carefully before you choose an option.
| Encoder Type | AB Dual-phase Incremental Magnetic Hall Encoder |
|---|---|
| Line Speed | Basic Pulse 11PPR x Gear Reduction Ratio |
| Supply Voltage | 3.3V / 5V DC |
| Basic Function | Built-in pull-up shaping resistor, direct connection to MCU |
| Interface Type | PH2.0 (standard connection cable) |
| Output Signal Type | Square Wave AB Phase |
| Response Frequency | 100KHz |
| Base Pulse Count | 11PPR |
| Magnetic Ring Trigger Pole Number | 22 Poles (11 Pairs) |
Also, contact our team if you need help comparing these details.
Related Motor Models & Options
If you are looking for a compact right-angle drive solution with higher torque capabilities, consider the 5882 High Torque Worm Gear Motor.
For applications requiring precise angular position control and step accuracy rather than DC speed feedback, check out the 42BY Stepper Gear Motor.
Keywords:
high torque geared dc motor, mechanical drive motor, small dc gear motor with encoder.
Development Samples:
Sampling quantities for stocked models are available for ordering directly from us online.
Engineering & Manufacturing:
Please contact one of our Sales Engineers for a quotation for production and consultation for customization and integration services.
Payment Method:
Payment methods : Paypal or T/T
Shipping Method:
1.Delivery: DHL door to door 5-7days.
2.Item will be shipped within 1-3 business days after the payment.
3.If you haven’t received the item on the Delivery Time, pls contact us by email if you have any questions. Normally, we will give you a reply within 24hours, if not, pls check the spam of your email box. We will do our best to help you solve the problems.
4.Please make sure your address is matched with the finally shipping address before you pay.
5.In order to ensure you receive your order tax free upon import, we will declare it with a lower value, pls be noted ,thanks!
FAQ - Frequently Asked Questions
Q: If customized, what information should you provide?
A: You need to provide the basic specification of the motor, such as: Dimensions, Sizes Applications, Voltage, Speed and Torque. It's better to offer application prototype drawings to us if possible.
Q: What's your main motors?
A: Diameter 4mm~42mm Dc Micro Motor And Gear Motor, Auto Dc Motor, Electric Motor, Gear Motor, Mini Dc Motor, Brush Dc Motor, Brushless Dc Motor, Spur Gear Motor, Micro Motor, Vibration Motor Etc.
Q: What's the main application of the micro dc motor?
A: Our mini DC motors are widely used in Home Applications, Office Equipment, Health-Care Application, Sanitation Industry, High-Class Toy, Banking System, Electronic and Electrical Tools, Automation Industry, Bank Equipments, Payment Equipments, Vending Machines, Power Door Lock, Electric Door Lock.
Free Shipping Site-wide When You Spend More Than $150
Related products
-
25mm 6V 12V DC Motor Reducer Brush Gear Motor Model NFP-GM25-BK370
$15.00 Select options -
37mm 12V 24V High Torque Geared Motor with Encoder NFP-GM37-545-EN
$25.00 Select options -
12mm 2.5V 6V N30 Gear Motor Electric Gearbox Reducer NFP-GM12-N30VA
$16.50 Select options -
12mm 3V 6V 12V Precision Micro Gear Motor Model NFP-GM1024-N20
$15.00 Select options
Still Can't Find Ideal Motors?
Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...
If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.
dreamscout –
This is actually a higher end gear dc motor with encoder… Lightweight, right size, right power, very well after testing, customer service was helpful too, honestly a good purchaseJust waiting for installation for my next project!